Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 142

Страница: 142 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

142

Figure 4-5-17

LACP Port Internal Information page screenshot

The page includes the following fields:

Object

Description

•

Oper Key

Current operational value of the key for the aggregation port.

•

Admin Key

Current administrative value of the key for the aggregation port.

•

LACPDUs Interval

Number of seconds before invalidating received LACPDU information.

•

LACP System Priority

LACP system priority assigned to this port channel.

•

LACP Port Priority

LACP port priority assigned to this interface within the channel group.

•

Admin State,

Oper State

Administrative or operational values of the actor’s state parameters:

•

Expired – The actor’s receive machine is in the expired state;

•

Defaulted – The actor’s receive machine is using defaulted operational partner

information, administratively configured for the partner.

•

Distributing – If false, distribution of outgoing frames on this link is disabled;

i.e., distribution is currently disabled and is not expected to be enabled in the

absenceof administrative changes or changes in received protocol

information.

•

Collecting – Collection of incoming frames on this link is enabled; i.e.,

collectionis currently enabled and is not expected to be disabled in the

absence of administrative changes or changes in received protocol

information.

•

Synchronization – The System considers this link to be IN_SYNC; i.e., it has

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGSD-1022

Отзывы:

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 142 / 688

Результаты поиска

Содержание SGSD-1022

Отзывы: