Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 270

Страница: 270 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

270

The group name “” specifies all configured hosts (see

“

Configuring Local/Remote Logon Authenticatio

n”). Any other group name

refers to a server group configured on the Group Settings page.

Authorization is only supported for servers.

4.11.5.11 AAA Authorization EXEC Settings

This feature specifies an authorization method name to apply to console and Telnet connections.

Figure 4-11-13

Settings screenshot

Click Security, AAA, Authorization, Exec Settings.

Enter a defined method name for console and Telnet connections, and click Apply.

The page includes the following fields:

Object

Description

Method Name

Specifies a user-defined method name to apply to

console

and

Telnet

connections.

4.11.5.12 AAA Authorization Summary

The Authorization Summary displays the configured authorization methods and the interfaces to which they are applied.

Figure 4-11-14

Settings screenshot

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGSD-1022

Отзывы:

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 270 / 688

Результаты поиска

Содержание SGSD-1022

Отзывы: