manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 324 / 688

Поделиться
Скачать
Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 324

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

324

address (when DHCP snooping is enabled), and unicast the 

packet to the DHCP server.   

(

This is the default policy

.) 

 

 

 

4.11.15.4 DHCP Snooping Port Configuration 

Configures switch ports as trusted or untrusted. 

 

Command Usage   

•

  A trusted interface is an interface that is configured to receive only messages from within the network. An untrusted interface 

is an interface that is configured to receive messages from outside the network or firewall.   

•

  When DHCP snooping enabled both globally and on a VLAN, DHCP packet filtering will be performed on any untrusted ports 

within the VLAN.   

•

  When an untrusted port is changed to a trusted port, all the dynamic DHCP snooping bindings associated with this port are 

removed.  

•

  Set all ports connected to DHCP servers within the local network or firewall to trusted state. Set all other ports outside the 

local network or firewall to untrusted state. 

 

 

Figure 4-11-48

 DHCP Snooping Port Configuration page screenshot 

 

The page includes the following fields: 

Object 

Description 

•

 

Trust Status 

Enables or disables port as trusted. 

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов