Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 223

Страница: 223 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

223

Command Usage

•

Any multicast groups that use the MVR VLAN must be statically assigned to it under the MVR Configuration menu (see

“Configuring Global MVR Settings”.

•

The IP address range from

224.0.0.0 to 239.255.255.255

is used for multicast streams. MVR group addresses cannot fall

within the reserved IP multicast address range of 224.0.0.x.

Figure 4-9-14

MVR Static Group Member page screenshot

1. Click

MVR

Group Member Configuration

2. Select

port

trunk

from the “Interface” field, and click

Query

to display the assigned multicast groups.

3. Select

multicast address

from the displayed lists, and click the

Add

Remove

button to modify the Member list.

The page includes the following fields:

Object

Description

•

Interface

Indicates a port or trunk.

•

Member

Shows the IP addresses for MVR multicast groups which have been statically

assigned to the selected interface.

•

Non-Member

Shows the IP addresses for all MVR multicast groups which have not been

statically assigned to the selected interface.

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGSD-1022

Отзывы:

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 223 / 688

Результаты поиска

Содержание SGSD-1022

Отзывы: