Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 122 / 688

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
122
4.4.5 Rate Limit
This function allows the network manager to control the maximum rate for traffic received on a port or transmitted from a port.
Rate limiting is configured on ports at the edge of a network to limit traffic coming in and out of the network. Packets that exceed
the acceptable amount of traffic are dropped.
Rate limiting can be applied to individual ports. When an interface is configured with this feature, the traffic rate will be monitored
by the hardware to verify conformity. Non-conforming traffic is dropped, conforming traffic is forwarded without any changes.
4.4.5.1 Input Rate Limit Port Configuration
Use the rate limit configuration pages to apply input rate limiting.
Figure 4-4-8 Input Rate Limit Port Configuration page screenshot
1. Click Port, Rate Limit, Inputt Port Configuration.
2. Enable the Rate Limit Status for the required interfaces, set the Rate Limit Scale and Rate Limit Level, and click Apply.
The page includes the following fields:
Object Description
•
Port/Trunk Displays the port/trunk number
•
Input Rate Limit Status
Enables or disables the rate limit.
(Default: Enabled )
•
Input Rate Limit
Scale/Level
Multiplied by one another, the scale and level set the rate limit.
For example, to limit port traffic to 500K bytes per second, choose 100K under