Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 108 / 688

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
108
4.3.3.5 SNMPv3 Groups
A SNMPv3 group sets the access policy for its assigned users, restricting them to specific read, write, and notify views. You can
use the pre-defined default groups or create new groups to map a set of SNMP users to SNMP views.
Figure 4-3-11 SNMPv3 Groups page screenshot
1. Click SNMP, SNMPv3, Groups .
2. Click New to configure a new group.
3. In the New Group page , define a name, assign a security model and level, and then select read and write views.
4. Click Add to save the new group and return to the Groups list.
5. To delete a group, check the box next to the group name, then click Delete.
The page includes the following fields:
Object Description
•
Group Name The name of the SNMP group to which the user is assigned.
(Range: 1-32 characters)
•
Model The user security model; SNMP v1, v2c or v3.
The security level used for the user:
- noAuthNoPriv There is no authentication or encryption used in SNMP
communications. (This is the default for SNMPv3.)
- AuthNoPriv SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
•
Level
- AuthPriv SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
•
Read View The configured view for read access.
(Range: 1-64 characters)
•
Write View The configured view for write access.
(Range: 1-64 characters)