Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 245

Страница: 245 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

245

4.10.3.2 Policy Map

Creating QoS Policies

This function creates a policy map that can be attached to multiple interfaces.

Command Usage

•

To configure a Policy Map, follow these steps:

- Create

Class Map

as described on

- Open

the

Policy Map

page, and click

Add Policy

- When

the

Policy Configuration

page opens, fill in the

“Policy Name

” field, and click

Add

- When

the

Policy Rule Settings

page opens, select a class name from the scroll-down list (Class Name field). Configure

a policy for traffic that matches criteria defined in this class by setting the quality of service that an IP packet will receive

(in the Action field), defining the maximum throughput and burst rate (in the Meter field), and the action that results from a

policy violation (in the Exceed field). Then finally click Add to register the new policy.

•

A policy map can contain multiple class statements that can be applied to the same interface with the Service Policy Settings.

You can configure up to 64 policers (i.e., meters or class maps) for each of the following access list types: MAC ACL, IP ACL

(including Standard ACL and Extended ACL), IPv6 Standard ACL, and IPv6 Extended ACL. Also, note that the maximum

number of classes that can be applied to a policy map is 16.

Policing is based on a token bucket, where bucket depth (i.e., the maximum burst before the bucket overflows) is specified by

the “Burst” field, and the average rate at which tokens are removed from the bucket is specified by the “Rate” option.

•

After using the policy map to define packet classification, service tagging, and bandwidth policing, it must be assigned to a

specific interface by a

service policy

to take effect.

Click QoS, DiffServ,

Policy Map

to display the list of existing policy maps.

To add a new policy map click

Add Policy

To configure the policy rule settings click

Edit Classes

Figure 4-10-20

Policy Map page screenshot

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGSD-1022

Отзывы:

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 245 / 688

Результаты поиска

Содержание SGSD-1022

Отзывы: