Planar Dome Md5/PCI, Руководство по установке

Страница: 83 / 150

Installing the Md5/PCI Board in a PC 71
Settings take effect after you restart the system.
You can remove any mode except the current mode.
Restoring the original modes
You can restore your original mode settings after you have
modified the configuration. This list provides important
information about restoring the original modes:
• The original configuration is stored in a
.cfg
file. When
you make changes that affect the configuration (such as
adding, deleting, or modifying syncs), the system writes
the changes to a
.dom
file. The
.cfg
file remains
unchanged.
• The name of the
.cfg
and
.dom
files derive from the
board type. For example, the Md5/PCI board files are
named
md5pci.dom
and
md5pci.cfg
.
• At boot time, the driver uses the
.dom
file if it exists;
otherwise, it uses the
.cfg
file. If the
.dom
file exists,
the driver does not read the
.cfg
file.
To restore the original modes
1. Click Restore Original Mode List in the Custom Syncs
dialog box.
The control panel restores the original
.cfg
file by
deleting the
.dom
file. A dialog box appears, explain-
ing that the original modes have been restored.
2. Click OK to close the Display Properties dialog box.
3. Click Restart.
When the computer restarts, it loads the
.cfg
file.
To load a custom
.cfg
file created in Windows NT 4.0,
change its suffix to
.dom
, move it to the
< windows
dir>\system32\drivers
directory, and then restart
the computer.