Planar Dome Md5/PCI, Руководство по установке

Страница: 106 / 150

94 Chapter 3
3. Paste the copy into
/etc/openwin/server/etc/\
OWconfig
, and edit it there. If the
OWconfig
file exists,
append the copy to the end of the file.
4. Delete the pound sign (
#
) at the beginning of each line
to uncomment the lines.
5. Edit the lines to match each device you installed, and
save your changes.
To modify the OWconfig file
This section explains the first example from the sample
code on page 93, line by line. It also tells how to modify
those lines to match the devices you are installing.
class="XSCREENCONFIG" name="DOMEmd5pci0Config"
In this line of code, the
name
provided must be unique.
You can alter it, as long as other
XSCREENCONFIG
sections
do not have the same
name
.
device="/dev/md5pci0.0"
This line indicates that the board is an Md5/PCI board that
was assigned the instance of zero (0) by the system. The
second zero (0) indicates that you are using the first head of
the board. To modify this line for the device you are install-
ing, replace the first zero (0) with the instance your board
was assigned by the system. If you are using the second
head, replace the second zero (0) with a one (1).
When you install a new driver on your system, it over-
writes the
OWconfig
file in the
/usr/openwin/\
server/etc
directory. By copying this section of the
file to the
/etc/openwin/server/etc
directory, you
ensure that the changes you make will not be overwrit-
ten when you update to newer versions of the DOME
driver. Make sure you edit these lines in the
/etc
directory only. If you uncomment these lines in both
directories, your system will ignore them.