Planar Dome Md5/PCI, Руководство по установке

Страница: 71 / 150

Installing the Md5/PCI Board in a PC 59
10. Select DOME board Md2/PCI, Md4/PCI, Md5/PCI, or
Md8/PCI , and click Next.
11. The Update Driver Warning dialog box appears.
12. Click Yes then Next.
The Digital Signature Not Found dialog box appears.
13. Click Yes to continue the installation.
The system copies the driver files.
14. Remove the diskette from the disk drive when the
copying is complete.
To finish the driver installation
1. Click Finish -> Close -> Yes to restart the computer.
When the system restarts, it prompts you to select an
operating system.
2. Select Microsoft Windows 2000 Professional and
log in.
3. Right-click the desktop, and select Properties ->
Settings
tab.
4. Click Display list and select Default Monitor on
DOME Md2/PCI, Md4/PCI, Md5/PCI, or Md8/PCI
.
5. Click Advanced -> Adapter tab -> List All Modes
button, highlight the desired resolution and refresh
rate, then click OK.
6. Click Apply -> OK from the Default Monitor and
DOME Md2/PCI, Md4/PCI, Md5/PCI, or Md8/PCI
Properties dialog box.
If the Digital Signature Not Found dialog box does
not appear, or you receive a warning that the driver
cannot be installed, see “Troubleshooting Tips for
Windows 2000” on page 95.