25
Frequency of the second channel in the channel plan is 471.250 MHz.
Name:
Channel type in the channel plan
Node: ChType
(1.3.6.1.4.1.32108.2.2.3.2.1.4)
Parameters: INTEGER(Analog(0),
QAM64(3), QAM128(4), QAM256(5), COFDM-QPSK(6),
COFDM-QAM16(7), COFDM-QAM64(8), Digital-unknown(255)), viewing only, list
Description:
View the modulation type of any channel in the channel plan.
Example: ChType.2
0.
The second channel in the channel plan is analog.
Measurement Results Table
Name:
Channel level
Node: Level
(1.3.6.1.4.1.32108.2.2.3.3.1.2)
Parameters:
INTEGER, viewing only, list
Description:
View the channel level for analog channels and actual channel power for digital
channels. The level value is expressed in (dB
μ
V * 10).
Example: Level.2
657.
The level of the second channel is 65.7 dB
μ
V.
Name:
Video/audio ratio of analog channel
Node: VAR
(1.3.6.1.4.1.32108.2.2.3.3.1.3)
Parameters:
INTEGER, only viewing, list
Description:
View the value of video/audio ratio for analog channel. The value is expressed in
(dB * 10). For digital channels the value is always set to
0.
Example: VAR.2
85.
The video/audio ratio of the second channel is 8.5 dB.
Name:
Signal/noise ratio of analog channel
Node: CNR
(1.3.6.1.4.1.32108.2.2.3.3.1.4)
Parameters:
INTEGER, viewing only, list
Description:
View the value of signal/noise ratio for analog channel. The value is expressed in
(dB * 10). For digital channels the value is always set to
0.
Example: CNR.2
432.
The signal/noise ratio of the second channel is 43.2 dB.
Name:
MER value of digital channel
Node: MER
(1.3.6.1.4.1.32108.2.2.3.3.1.5)
Parameters:
INTEGER, viewing only, list
Description:
View MER value for digital channel. The MER value is expressed in (db * 10). If
synchronization with the channel is not achieved, the
0
value is indicated. For
analog channels the value is always set to
0.
Example: MER.3
322.
MER value of the third channel is 32.2 dB.
Name:
Bit Error Rate value before Reed-Solomon decoder
Node: preBER
(1.3.6.1.4.1.32108.2.2.3.3.1.6)
Parameters:
INTEGER, viewing only, list
Description:
View preBER value for digital channel. The value is expressed as (preBER *
10^10). If synchronization with the channel is not achieved,
2^32-1
is indicated.
For analog channels the value is always set to
0.
Example: preBER.3
11.
The preBER value of the third channel is 1.1E-9.
Содержание CIU-003
Страница 1: ...CIU 003 TV SIGNAL ANALYZER OPERATING MANUAL ...
Страница 2: ...Revision 1 4 from 12 04 13 ...
Страница 6: ...6 Figure 1 1 Figure 1 2 ...