27
Node: HighPreBER
(1.3.6.1.4.1.32108.2.2.3.4.1.9)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed BER value before Reed-Solomon decoder for digital channel.
Name:
Indicator of high postBER value
Node: HighPostBER
(1.3.6.1.4.1.32108.2.2.3.4.1.10)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed BER value after Reed-Solomon decoder for digital channel.
Name:
Indicator of high ripple for adjacent channels
Node: HighDL_adjacent
(1.3.6.1.4.1.32108.2.2.3.4.1.11)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value for adjacent channels.
Name:
Indicator of high ripple within 40 to 300 MHz frequency range
Node: HighDL_40_300_MHz
(1.3.6.1.4.1.32108.2.2.3.4.1.12)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value within the frequency range of 40 to 300 MHz.
Name:
Indicator of high ripple within 40 to 600 MHz frequency range
Node: HighDL_40_600_MHz
(1.3.6.1.4.1.32108.2.2.3.4.1.13)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value within the frequency range of 40 to 600 MHz.
Name:
Indicator of high ripple within the frequency range of 40 to 1000 MHz
Node: HighDL_40_1000_MHz
(1.3.6.1.4.1.32108.2.2.3.4.1.14)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value within the frequency range of 40 to 1000 MHz.
Name:
Indicator of high ripple within any frequency range with 100 MHz bandwidth
Node: HighDL_DF100_MHz
(1.3.6.1.4.1.32108.2.2.3.4.1.15)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value within any frequency range with 100 MHz bandwidth.
Name:
Indicator of high ripple between digital and analog channels
Node: HighDL_An_Dg
(1.3.6.1.4.1.32108.2.2.3.4.1.16)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check if a channel passed the limit test by the following test criteria: maximum
allowed ripple value between digital and analog channels.
Name:
Indicator of MPEG stream error: two or more consecutive corrupted sync bytes
detected (ETSI TR101290 1.1)
Node: mpeg_TS_Sync_loss
(1.3.6.1.4.1.32108.2.2.3.4.1.17)
Parameters:
INTEGER( true(1), false(0) ), viewing only, list
Description:
Check the results of channel MPEG stream test for ETSI TR101290 1.1 error.
Name:
Indicator of MPEG stream error: correct sync byte not detected in packet (ETSI
TR101290 1.2)
Node: mpeg_Syn_byte_error
(1.3.6.1.4.1.32108.2.2.3.4.1.18)
Содержание CIU-003
Страница 1: ...CIU 003 TV SIGNAL ANALYZER OPERATING MANUAL ...
Страница 2: ...Revision 1 4 from 12 04 13 ...
Страница 6: ...6 Figure 1 1 Figure 1 2 ...