
~
164
~
8.1 Checklist
MALFUNCTION
POSSIBLE CAUSE(S)
MEASURE(S)
T
HE APPLIANCE DOES NOT WORK AT ALL
.
1.
The plug of the appliance is not
connected to the socket.
1.
Connect the appliance to the mains
properly.
2.
The plug has become loose.
2.
Check the plug.
3.
The socket is not supplied with
energy.
3.
Check the corresponding socket by
connecting it with another appliance.
4.
The fuse is switched off.
4.
Check the fuse box.
5.
The voltage is too low.
5.
Compare the data on the model plate
with the data of your energy supplier.
T
HE SET PROGRAMME DOES NOT START
.
1.
Door is not closed properly.
1.
Close the door properly.
2.
No water supply.
2.
Check the water supply.
3.
S
TART
/
P
AUSE
button is pressed.
3.
Check your settings.
4.
O
N
/
O
FF
button
53
is not pressed.
4.
Press the O
N
/
O
FF
button.
F
AULTY HEATING
.
1.
Heater defective.
1.
The appliance can wash but not heat.
Please contact your aftersales service
immediately.
W
ATER LEAKAGE
.
1.
Connection of the hoses are not
watertight.
1.
Check the hoses.
2.
Drain pump / drain pump filter is
blocked.
2.
Check the drain pump / drain pump
filter.
3.
Water drain hose is dirty.
3.
Clean the water drain hose.
I
NDICATORS
/
D
ISPLAY DO NOT WORK
.
1.
No energy supply.
1.
Check the energy supply.
2.
Circuit board damaged.
2.
Please contact your aftersales
service.
3.
Wiring harness damaged.
3.
Check the wiring harness (please
contact your aftersales service if
necessary).
53
Depending on model.