
~
148
~
1.
When the programme is finished, the display indicates «
END
» and an acoustic
signal sounds.
2.
The door lock is deactivated automatically after approx. 2 minutes. The
operational status indicator of the door lock «
» goes
off
.
3.
When the programme is finished, always turn the
ROTARY KNOB
for the
programme selection back to «
O
FF
» to switch off the appliance completely.
4.
Close the water tap.
5.
Open the door and remove the laundry.
6.
Leave the door and the detergent dispenser slightly opened, so the moisture can
escape completely.
4.7 Selection of a new programme / function
❖
You must
switch off
the appliance first to cancel the old settings and to be able
to make new settings.
1.
During a washing / drying cycle, turn the rotary knob for the programme
selection to the position «
O
FF
». Leave the rotary knob in this position for
at
least 3 seconds
to switch off the appliance
and
cancel all settings.
2.
Set a
new programme
and new functions if desired.
3.
If needed, set a new spin speed.
4.
Please note
:
do not
add more detergent.
5.
Press the « S
TART
/ P
AUSE
» -
BUTTON
to start the new programme.
4.8 Reload laundry
WARNING!
If you stop a running programme, the temperature of the
water, the laundry and the drum can be very high. Be very careful while
removing the laundry. RISK OF SCALDING! RISK OF BURNS!
It is very important to check the water level and the temperature of the
water in the washing drum before opening the door.
T
O RELOAD LAUNDRY DURING A RUNNING PROGRAMME
,
PROCEED AS
FOLLOWS
.
1.
Press the « S
TART
/ P
AUSE
» -
BUTTON
once. The washing / drying cycle is
interrupted.
2.
If the running programme permits the deactivation of the door lock, the
operational status indicator of the door lock
flashes
and the operational status
indicator of the function
« R
ELOAD LAUNDRY
» goes on
; requirements: the
temperature in the washing drum is
less
than 50 °C and / or the current washing
/ drying programme
has not
progressed
too
far.