
~
161
~
5.
Remove the water inlet hose (
A
) from the
washer - dryer
(
B
/ water inlet valve
on the back of the appliance); s. fig. below.
6.
Remove the filter (
D
) from the water valve (
B
) using a universal pliers (
C
); s. fig.
below.
7.
Clean the filter (
D
) using some water and a toothbrush (
E
); s. fig. below.
Fig. similar: fig. serve as an example only.
8.
Reinstall the filter (
D
) properly.
9.
Reconnect the water inlet hose to the appliance again.
10.
Open the tap and make sure that the connections (hose - tap / hose - appliance)
are
properly installed and watertight.
Fig. similar: fig. serve as an example only.