
~
136
~
7.
Press the « D
RY
L
EVEL
» -
BUTTON
repeatedly
until the desired drying level (
,
,
) is indicated on the display; see also chapter 4.4.3 S
ELECTION
OF THE ADDITIONAL FUNCTIONS
/
OPTIONS
//
FUNCTION
:
« D
RY
L
EVEL
».
8.
Press the « S
TART
/ P
AUSE
» -
BUTTON
to start the set programme.
9.
The door lock will be activated automatically. The operational status indicator of
the door lock «
» goes on.
10.
When the programme is finished, the display indicates «
END
» and an acoustic
signal sounds (if the acoustic signals are activated).
11.
The door lock is deactivated
automatically
after
approx. 2 minutes
. The
operational status indicator of the door lock «
» goes
off
.
12.
When the programme is finished, always turn the
ROTARY KNOB
for the
programme selection back to «
O
FF
» to switch off the appliance completely; see
also chapter 4.6 E
ND OF A WASHING
/
DRYING PROGRAMME
.
It is possible that the current run time of the selected drying programme will be
adjusted automatically so that it may vary from the drying time which is indicated
on the display.
H
OW TO SET AND START A COMBINED PROGRAMME
1.
Put the laundry to be washed in the drum.
2.
Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3.
Open the water tap.
4.
Set a programme suitable for the laundry to be washed using the
ROTARY
KNOB
:
e.g. programme « C
OTTON
».
5.
The appliance is now switched on and in
STANDBY MODE
.
6.
The
DISPLAY
indicates the default duration of the programme (hours : minutes)
39
.
7.
Additionally to the selected programme, further functions such as temperature,
spin speed, delay, etc. can be selected by pressing the corresponding buttons; s.
chapter 4.4.3 S
ELECTION OF THE ADDITIONAL FUNCTIONS
/
OPTIONS
.
8.
Press the « D
RY
L
EVEL
» -
BUTTON
repeatedly
until the desired drying level (
,
,
) is indicated on the display; see also chapter 4.4.3 S
ELECTION
OF THE ADDITIONAL FUNCTIONS
/
OPTIONS
//
FUNCTION
:
« D
RY
L
EVEL
».
9.
Press the « S
TART
/ P
AUSE
» -
BUTTON
to start the set programme.
10.
The door lock will be activated automatically. The operational status indicator of
the door lock «
» goes on.
11.
When the programme is finished, the display indicates «
END
» and an acoustic
signal sounds (if the acoustic signals are activated).
39
Depending on model.