
~
149
~
3.
The door lock is deactivated automatically after approx. 2 minutes. The
operational status indicator of the door lock «
»
goes off
.
4.
Open the door
5.
Reload the laundry and close the door.
6.
Press the « S
TART
/ P
AUSE
» -
BUTTON
to reactivate the programme.
If the door lock will not be released and the door cannot be opened, the
temperature inside the washing drum is more than 50 °C or the current washing
/ drying programme has progressed too far.
NOTICE!
It is not possible to open the door while the door lock indicator is
on.
Do not
open the door by force.
To open the door by force can damage
the appliance seriously. RISK OF DAMAGE!
NOTICE!
Any damage to the appliance and / or the door caused by
forcible opening of the door are not subject to the guarantee or the
warranty!
NOTICE!
If there is a lot of foam or water in the drum, open the door very
carefully. Use a dry cloth to prevent foam and / or water from leaking out
of the drum while the door of the appliance is opened.
4.9 Unbalance protection
❖
The appliance is equipped with an unbalance protection to avoid strong
vibrations of the appliance during spinning.
➢
Before starting spinning the appliance needs a certain period to space the laundry
evenly.
➢
If the laundry is not spaced evenly in the drum, the spin speed can be decreased
47
to avoid strong vibrations of the appliance due to unbalance.
➢
If the laundry load in the appliance is too low to reach a balance of the drum, the
spin cycle may not start. Then you have to reload laundry; s. chapter 4.8 R
ELOAD
LAUNDRY
.
47
Depending on model / washing programme.