Installing the XPP-1 into the CHS-4
;3 7UDQVSRQGHU ,QVWDOODWLRQ
XP Series Transponder PN 15888:G 6/11/98
9
,QVWDOOLQJWKH;33LQWRWKH&+6
Follow Steps 1 through 4 in Figure 4 below to install an XPP-1 into the CHS-4 chassis.
)LJXUH ,QVWDOOLQJ WKH ;33 LQWR WKH &+6
Step 1
Insert the XPP-1 into the left-most
slot on the CHS-4, angling the
upper end of the module into
position as shown above.
Step 3
Pull the XPP-1 down until the
module engages the slot in the
chassis.
Step 4
Align the module screws with the
threaded holes in the chassis and
secure into place.
Step 2
Carefully push the XPP-1 toward
the back of the cabinet until the
module is vertical.
