;3 7UDQVSRQGHU ,QYHQWRU\
Optional XP Transponder Components
6
XP Series Transponder PN 15888:G 6/11/98
$365$X[LOLDU\3RZHU6XSSO\
The APS-6R Auxiliary Power Supply is designed to
power devices that require filtered, non-resettable power,
such as XP Transponder modules, Notification Appliance
Circuit modules, and Control modules. It provides two
24 VDC (filtered) output circuits (3 A each, 6 A total, 4
A continuous). For more information on the APS-6R,
refer to the APS-6R Manual listed in the Related
Documentation Chart of this manual.
2SWLRQDO;37UDQVSRQGHU&RPSRQHQWV
;5$02SWLRQDO
The XRAM-1 nonvolatile RAM chip is required when
the XPP-1 will be programmed for specific local mode
operation or "Rapid All Call" Audio Operation. All
information programmed into the XPP-1 is stored on the
XRAM-1. The XRAM-1 replaces a RAM chip on the
XPP-1.
030
The Main Power Meter-2 provides a voltmeter and
ammeter that may be used in conjunction with the
MPS-24A and MPS-24AE Main Power Supplies only.
1(/5
An N-ELR Resistor Mounting Plate is required in
Canada for mounting End-of-Line (ELR) resistors.
One N-ELR Resistor Mounting Plate is used for each
ELR resistor.
&DELQHWV
Cabinets for the XP Transponder system include the
door and backbox and are offered in the following four
sizes:
•
CAB-A3 - Single Row Cabinet (illustrated).
1RWH 7KH &$%$ ZLOO QRW VXSSRUW WKH DGGHG LQVWDOODWLRQ RI
$XGLR $PSOLILHUV
•
CAB-B3 - Double Row Cabinet.
•
CAB-C3 - Triple Row Cabinet.
•
CAB-D3 - Quad Row Cabinet.
For door and backbox dimension, refer to the
Installation Drawing, Document 15330, packaged with
each cabinet.
'3
The Dress Panel (DP-1) covers one row assembly in an
XP Transponder cabinet.
