16
EN
ENGLISH
16. INSTALLING THE SMOKER DOOR
Parts Required :
1 x Smoker Door
(#40)
1 x Lower Cabinet Assembly
(#46)
8 x M4x8 mm White Zn Screws
(#G)
Installation
:
• Mount Smoker Door with Hinge assembly to Lower
Cabinet Assembly.
Use: 8 x M4x8 mm Screws
See Fig. 16.
FIG. 16
G
G
40
46
17. PREPARING THE GRILL ASSEMBLY
FOR INSTALLATION
Parts Required :
1 x Gas and Charcoal Cabinet with Lids Assembly
(#13)
1 x Cart Assembly
Installation
:
• Carefully put the main chamber on the top of the smoker
body and then remove the twist tie. Pull out the smoker
electric wires and smoker temperature wire/sensor
from the back side of Control panel first, then place the
temperature wire and sensor toward front.
See Fig. 17.1. and Fig. 17.2.
ATTENTION: Do not pinch or sandwich the electric wires
and/or temperature wire sensor during the assembly.
CART
ASSEMBLY
ELECTRIC
WIRES
TWIST TIE
TEMPERATURE
SENSOR
13
FIG. 17.1
FIG. 17.2