Piper PA-34-200T Seneca II, Руководство по обслуживанию

Страница: 142 / 869

8. Special Inspections
WARNING: FAILURE TO CONSULT APPLICABLE VENDOR PUBLICATION(S), WHEN
SERVICING OR INSPECTING VENDOR EQUIPMENT INSTALLED IN PIPER
AIRCRAFT,
MAY RENDER THE AIRCRAFT UNAIRWORTHY. (SEE
INTRODUCTION - SUPPLEMENTARY PUBLICATIONS.)
A. Requirements
The following inspections are required in addition to those listed in Table III-I. These inspections
are required at intervals of:
Flight hours;
Calendar Year; or
The specific operation being conducted or the environment being operated in.
Unless otherwise indicated, these inspections are to be repeated at each occurrence of the specified
interval. Note that the items listed herein are guidelines based on past operating experience. Each
operator should closely monitor his own unique operating conditions/environment and react
accordingly to keep his aircraft airworthy.
NOTE: A log book entry should be made upon completion of any inspections.
(1) Per Flight Hour
(a)
Each 10 Hours
For airplanes which have not installed new main landing gear trunnion
assemblies P/N’s 67926-030, 67926-032, 67926-040, or 67926-042 (Left) and
67926-031, 67926-033, 67926-041, or 67926-043 (Right) (each embossed with
forging number 02599-2); and, have accumulated 2000 hours time-in-service on
one or both of the installed main landing gear trunnion assemblies:
perform
Main Gear Trunnion Assembly Dye-Penetrant Inspection (see paragraph 7-21ab)
on one or both trunnion assemblies, as required.
(b)
Each 25 Hours
1 For engines using only a pressure screen oil filtration system (i.e., not equipped
with any full flow cartridge filter), change the engine oil and clean the screens
each 25 hours of engine operation.
2 In S/N’s 34-7570001 thru 34-7970075, 34-7970077 thru 34-7970105,
34-7970107 thru 34-7970109, and 34-7970111, 34-7970113 thru 34-7970117,
34-7970120 and 34-7970121, 34-7970123 thru 34-7970135, 34-7970137,
34-7970141, 34-7970143, 34-7970145 and 34-7970164; for airplanes which
have not accomplished the modification in paragraph 4-56c or complied with
Part III of Piper Service Bulletin No. 633B:
each 25 hours time-in-service,
inspect and rig the door latching and locking mechanism per paragraph 4-56b.
PIPER SENECA II SERVICE MANUAL
01/01/09 III - INSPECTION
1C59