Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use Multi-Control to select Scan mode.
Scan mode
appears in the display.
2 Press Multi-Control to turn scan play
on.
The first 10 seconds of each track is played.
3 When you find the desired track press
Multi-Control to turn scan play off.
The track will continue to play.
#
If the display has automatically returned to
the playback display, select
Scan mode
again by
using
Multi-Control
.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Use Multi-Control to select Pause.
Pause
appears in the display.
2 Press Multi-Control to turn pause on.
Play of the current track pauses.
#
To turn pause off, press
Multi-Control
again.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use Multi-Control to select
Compression.
Compression
appears in the display.
2 Press Multi-Control to select your favor-
ite setting.
Press
Multi-Control
repeatedly to switch be-
tween the following settings:
COMP/BMX OFF
COMP 1
COMP 2
COMP/BMX OFF
BMX 1
BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use Multi-Control to select
Search mode.
Search mode
appears in the display.
2 Press Multi-Control to select the search
method.
Press
Multi-Control
until the desired search
method appears in the display.
!
FF/REV
Fast forward and reverse
!
Rough search
Searching every 10
tracks
Built-in CD Player
En
18
Section
05