3 Push Multi-Control up or down to ad-
just the level.
Each pushing
Multi-Control
up or down in-
creases or decreases the selected bass or tre-
ble level.
+6
6
is displayed as the level is
increased or decreased.
4 Turn Multi-Control clockwise to select
Bass (bass and treble frequency adjust-
ment).
Bass
appears in the display.
#
If the treble frequency has been previously ad-
justed,
Treble
will be displayed.
5 Push Multi-Control left or right to select
the desired frequency.
Each pushing
Multi-Control
left or right se-
lects frequencies in the following order:
Bass:
40
63
100
160
(Hz)
Treble:
2.5k
4k
6.3k
10k
(Hz)
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Use Multi-Control to select LOUD.
LOUD
appears in the display.
2 Press Multi-Control to turn loudness
on.
Loudness level (e.g.,
Mid
) appears in the dis-
play.
3 Push Multi-Control left or right to select
a desired level.
Each pushing
Multi-Control
left or right se-
lects level in the following order:
Low
(low)
Mid
(mid)
High
(high)
4 To turn loudness off, press
Multi-Control again.
OFF
appears in the display.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Use Multi-Control to select Sub-W1.
Sub-W1
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer controller setting is
Preout :FULL
, you cannot select
Sub-W1
.
2 Press Multi-Control to turn subwoofer
output on.
Normal
appears in the display. Subwoofer out-
put is now on.
#
To turn subwoofer output off, press
Multi-Control
again.
3 Push Multi-Control left or right to select
the phase of subwoofer output.
Push
Multi-Control
left to select reverse
phase and
Rev.
appears in the display. Push
Multi-Control
right to select normal phase
and
Normal
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Use Multi-Control to select Sub-W2.
Sub-W2
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer output is on, you can se-
lect
Sub-W2
.
2 Push Multi-Control left or right to select
cut-off frequency.
Each pushing
Multi-Control
left or right se-
lects cut-off frequencies in the following order:
50Hz
80Hz
125Hz
Audio Adjustments
En
45
English
Section
10