1 Use Multi-Control to select FM step.
FM step
appears in the display.
2 Press Multi-Control to select the FM
tuning step.
Pressing
Multi-Control
repeatedly will switch
the FM tuning step between 50 kHz and 100
kHz. The selected FM tuning step will appear
in the display.
Note
If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
1,602 kHz allowable) to 10 kHz (530
1,640
kHz allowable).
1 Use Multi-Control to select AM step.
AM step
appears in the display.
2 Press Multi-Control to select the AM
tuning step.
Pressing
Multi-Control
repeatedly will switch
the AM tuning step between 9 kHz and 10 kHz.
The selected AM tuning step will appear in the
display.
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.
1 Use Multi-Control to select
Warning tone.
Warning tone
appears in the display.
2 Press Multi-Control to turn warning
tone on.
ON
appears in the display.
#
To turn warning tone off, press
Multi-Control
again.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Use Multi-Control to select AUX.
AUX
appears in the display.
2 Press Multi-Control to turn AUX on.
ON
appears in the display.
#
To turn AUX off, press
Multi-Control
again.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car
s headlights are turned on. You
can turn the dimmer on or off.
1 Use Multi-Control to select Dimmer.
Dimmer
appears in the display.
2 Press Multi-Control to turn dimmer on.
ON
appears in the display.
#
To turn dimmer off, press
Multi-Control
again.
Initial Settings
En
49
English
Section
11