!
Do not recharge, disassemble, heat or dispose
of the battery in fire.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic materi-
als.
!
In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
!
When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions
rules that
apply in your country/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
!
The remote control may not function prop-
erly in direct sunlight.
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
FUNCTION
button and
AUDIO
button
You can also select the desired mode by
FUNCTION
button and
AUDIO
button on the
remote control. But operation of
FUNCTION
button and
AUDIO
button on the remote con-
trol differs from the operation of
Multi-Control
on the head unit. When operat-
ing the remote control, switch through the
modes as described below to select the mode.
FUNCTION
button operation
%
Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press
FUNCTION
repeatedly to switch be-
tween the following modes:
Play mode
(repeat play)
Randommode
(random play)
Scan mode
(scan play)
Pause
(pause)
Compression
(compres-
sion and BMX)
Search mode
(search meth-
od)
TitleInput "A"
(disc title input)
Note
Refer to
Introduction of advanced built-in CD
player operation
on page 17.
AUDIO
button operation
%
Press AUDIO to select the desired
mode.
Press
AUDIO
repeatedly to switch between
the following modes:
FAD
(balance adjustment)
EQ
(equalizer
curve adjustment)
F 80 Q 1W
(equalizer
curve fine adjustment)
Bass
(bass and treble
level adjustment)
Bass
(bass and treble fre-
quency adjustment)
LOUD
(loudness)
Sub-W1
(subwoofer on/off setting)/
NonFad
(nonfading output on/off setting)
Sub-W2
(subwoofer setting)/
NonFad
(nonfading out-
put setting)
HPF
(high pass filter)
SLA
(source level adjustment)
ASL
(automatic
sound levelizer)
Note
Refer to
Introduction of audio adjustments
on
page 42.
Before You Start
En
8
Section
01