!
Do not insert anything other than a CD into
the CD loading slot.
!
There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read in,
Format read
is dis-
played.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Understanding built-in CD
player error messages
on page 54.
!
You can eject the CD by pressing and holding
EJECT
with opening the front panel when the
CD loading or ejecting cannot operate proper-
ly.
Adjusting the volume
%
Use Multi-Control to adjust the sound
level.
With the head unit, rotate
Multi-Control
to in-
crease or decrease the volume.
With the remote control, press
VOLUME
to in-
crease or decrease the volume.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Basic Operations
En
12
Section
03