PDP-504CMX/1
190
1
2
3
4
1
2
3
4
C
D
F
A
B
E
INSTALLATION OF THE UNIT
I
nstallation using the supplied display stand
Be sure to fix the supplied stand to the installation surface.
Use commercially available M8 bolts that are 25 mm longer
than the thickness of the installation surface.
1. Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
2. Set this unit in the stand.
3. Fix this unit using the supplied washer and bolt.
CAUTION
This display unit weighs at least 30 kg (67 lbs) and
has little front-to-back depth, making it very unstable
when stood on edge. As a result, two or more
persons should cooperate when unpacking, moving,
or installing the display.
110 mm (4-
5
/
16
in.)
Use a 6 mm (
1
/
4
in.) hex
wrench to bolt them.
Rear
Front
PDP-504CMX: 798 mm (31-7 /16 in.)
(Bolt hole thread pitch)
PDP-434CMX: 880 mm (31-7 /16 in.)
(Bolt hole thread pitch)
Содержание PDP-504CMX
Страница 11: ...PDP 504CMX 1 11 5 6 7 8 5 6 7 8 C D F A B E ...