Pioneer PDP-504CMX, Руководство по обслуживанию

Страница: 103 / 191

PDP-504CMX/1
103
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Reference: Commands for adjustment of differences in signals and memory cells used
for storing adjustment values
• Basically no adjustment is required for the Service Assy, as it is properly adjusted before shipment.
Adjustment values differ depending on the input function,
input signal format, and main/sub screen.
Adjustment values to be stored in the EEPROM
of the AV I/O (INDIVIDUAL mode)
Input and
Signal Format
Commands for Adjustment
Route for the
Main Screen
Route for the
Sub Screen
INPUT1
(RGB)
RYG
GYG
BYG RYG
GYG
BYG
INPUT1
(Color difference)
RYG
GYG
BYG RYG
GYG
BYG
Adjustment values differ depending on the signal resolution, input
signal format, and main/sub screen.
Note: No adjustment is required for DVI input or signals
converted to digital signals by IC1.
[Main adjustment 1]
Main A/D adjustments for R, G, and B individually
(COMMON-RGB mode)
Adjustment values to be stored in the EEPROM
of the RGB (COMMON mode)
Adjustment values differ depending on the input function
and main/sub screen.
• Eight adjustment tables are provided here, depending on the input
function and main/sub screen.
• Four adjustment tables are provided here, depending on the input
function, input signal format, and main/sub screen.
• No adjustment is required for INPUT 2, which is of DVI (digital
video interface) standards.
• For adjustment according to the above tables, input correspon-
ding signals to INPUT 5 to change the RGB/color-difference
signal setting then perform adjustment.
• Four adjustment tables are provided here, depending on the
signal resolution, input signal format, and main/sub screen.
• For adjustment according to the above tables, input video signals
to INPUT 5 to switch to the route for sub input and to change the
RGB/color-difference signal setting then perform adjustment.
• Two adjustment tables are provided here, depending on the
signal format.
• For adjustment according to the above tables, input video signals
to INPUT 5 to switch to the route for main input and to change
the RGB/color-difference signal setting then perform adjustment.
• A contrast gain commits this adjustment command simultaneously
three colors.
• Two adjustment tables are provided here, depending on the
signal format.
Adjustment values to be stored in the EEPROM
of the PDA-5003 or PDA-5004
Input and
Signal Format
Commands for Adjustment
Route for the
Main Screen
Route for the
Sub Screen
INPUT3
(Y/C)
VSG
VSO RYG
GYG
BYG
INPUT4
(Comp. V)
VSG
VSO RYG
GYG
BYG
INPUT5
(Y/C)
RYG
GYG
BYG RYG
GYG
BYG
INPUT5
(Color difference)
RYG
GYG
BYG RYG
GYG
BYG
Input and
Signal Format
Commands for
Adjustment
Conditions for the Tables
to be Switched
525i
(RGB)
MRG
MGG
MBG MRO
MGO
MBO
Video RGB signals
(excl. 1125p signals)
525i
(Color difference)
MRG
MGG
MBG MRO
MGO
MBO Video color-difference
signals
(excl. 1125p signals)
Input and
Signal Format
Commands for
Adjustment
Conditions for the Tables
to be Switched
RGB
SRG
SGG
SBG SRO
SGO
SBO
All R, G, and B signals
Color difference
SRG
SGG
SBG SRO
SGO
SBO
All color-difference signals
Input and
Signal Format
Commands for
Adjustment
Conditions for the Tables
to be Switched
RGB ADC All R, G, and B signals
Color difference
ADC
All color-difference signals
1080p
(RGB)
MRG
MGG
MBG MRO
MGO
MBO
All PC signals and 1125p
RGB signals
1080p
(Color difference)
MRG
MGG
MBG MRO
MGO
MBO
1125p color-difference
signals
[Sub adjustment 1]
Main A/D adjustments for R, G, and B individually
(COMMON-RGB 1 mode)
[Main adjustment 2]
Main A/D adjustments for all R, G, and B simultaneously
(COMMON-RGB 2 mode)