10
Enjoying through External Equipment
38
En
About External Equipment
You can connect many types of external equipment to your Plasma Display, like a DVD player, VCR, game console, and camcorder.
To view images coming from external equipment, select the input source using the
INPUT
button on the remote control or on the
Plasma Display.
• To protect all equipment, always turn off the Plasma Display before connecting to a DVD player, VCR, STB, or other external
equipment.
• Refer to the relevant instruction manual (STB, VCR, DVD player, etc.) carefully before making connections.
Connecting HDMI equipment
The digital video and audio signals can be input to the HDMI
terminal. To use the HDMI terminal, specify the types of video
and audio signals of the connected equipment. For the types of
these signals, refer to the operation manual supplied with the
connected equipment.
Input signal correlation table
1920 x [email protected] Hz/60 Hz
720 x [email protected] Hz/60 Hz
1280 x [email protected] Hz/60 Hz
Depending on the equipment to be connected, you also need to
connect analog audio cables. In this case, use the HDMI1
terminal.
Displaying an image of HDMI
To watch an HDMI image, press
INPUT
to select the HDMI1 or
HDMI2.
• PC signals are not supported.
• If no image appears, an incompatible digital video signal may be
present (see the Input signal correlation table). To determine the
digital video signal type, refer to the operation manual supplied with
the connected equipment.
• It may take a short while until the image is displayed, depending on
the equipment connected.
HDMI Cable with the HDMI mark
(commercially available)
Audio Cable
(commercially available)
DVD Player
HDMI equipment
11-PDP5016HD-Eng (38-41)
4/7/06, 21:41
38
