44
Setting Up for Surround Sound
1
The SPEAKER DISTANCE should be
selected. If it isn’t use the
5∞
buttons
to select it. Press the ENTER button.
The setup possibilities appear on your TV.
2
There are two ways to set the
SPEAKER DISTANCE, MANUAL and
AUTO. Select the method you’d like to
use with the
5∞
buttons and press
ENTER.
MANUAL:
In this way of setting the distance you
choose the speaker and adjust the distance yourself.
AUTO:
This way of setting the distance is like that
described in the Quick Start Guide (p.16-18). The
distances are set automatically by the receiver as it
outputs the test tones. For this setup you must have the
setup mic connected (see p.16).
WARNING :
Be prepared! The test tones are output at
a high volume level.
MASTER VOLUME rotates to the reference position (0 dB.
After a few seconds the test tone is output.
SPEAKER DISTANCE
Adding a slight delay to some speakers is necessary to achieve proper sound depth, separation as well as an
effective surround sound effect. You need to figure out the distance from your listening position to your
speakers to add the proper delay. The following steps show you how to set the delay time for each channel by
specifying the distances from your listening position to each speaker. Once you specify the speaker distances
(or it is done automatically through the AUTO selection, or in the Quick Start Guide), the receiver calculates the
correct delay times automatically. If continuing from CHANNEL LEVEL go to step 1. If starting fresh, complete
steps 1-4 in “Setting Up for Surround Sound“ (p.40) first.
5˜∞
buttons
ENTER
STANDBY/O
1
2.Surround Setup
[ Check ]
[
1.Speaker Systems
]
[ 2.Channel Level ]
[
3
.
Speaker Distance
]
[ 4.Acoustic Cal EQ]
[Return]
4
In MANUAL mode, when done select
RETURN with the
5∞
buttons and
press ENTER.
The MASTER VOLUME will return to its original position.
In SEMI AUTO mode, anytime you
want to exit the process press ENTER.
The MASTER VOLUME will return to its original position.
In AUTO mode, when the setup is
complete you’ll see the “!!Finish!!”
screen.
If you want to view the settings select CHECK and press
ENTER. After checking to make sure they’re right select
RETURN and press ENTER. If you don’t want to view the
settings simply select RETURN and press ENTER.
Next, proceed to SPEAKER DISTANCE.
4
+
1. 5dB
+
1. 5dB
+
2. 0dB
-
3. 5dB
-
1. 5dB
+
3. 0dB
+
2. 0dB
+
10. 0dB
2.2. Channel Level
Manual
LEFT
[
]
CENTER
[
]
RIGHT
[
]
SURROUND R [
]
SURR BACK R [
]
SURR BACK L [
]
SURROUND L [
]
SUB WOOFER [
]
[
Return
]
memo
You can change the channel level of each
speaker at any time by using the EFFECT CH/
SEL. and +/- buttons on the RECEIVER SUB
screen on the remote control. You can set the
levels for each three groups of the listening
modes (STANDARD/HOME THX, ADVANCED
CINEMA/ADVANCED CONCERT, STEREO)
and MULTI CH IN mode but keep in mind that
all your settings will be cleared if you use the
Surround Setup or Auto Surround Sound Setup
to set the channel levels at a later date.
2.3. Speaker Distance
[
Manual
]
[Auto]
[Return]
Your Speaker Systems
” Normal Surround ”
2
Содержание Elite VSX-49TX
Страница 3: ...3 ...
