17
QUICK ST
AR
T GUIDE
Quick Start Guide Part2
10
Auto Surround Setup
Please Wait
Caution!!
Test tone is
output loudly.
[
Cancel
]
Auto Surround Setup
•
Connect microphone
•
Please be quiet
•
Move obstacles away
•
If you have a subwoofer
turn power on and
turn volume up
[
Start
]
[Cancel]
Auto Surround Setup
Now Analyzing
•••
Environment Check
Ambient Noise
[OK]
Microphone
[OK]
Speaker Level
[
OK
]
[
Cancel
]
Check!!
FRONT
[ YES
]
CENTER
[ YES
]
SURROUND [ YES
]
SURR BACK [ YES
X
2]
SUB WOOFER [ YES
]
[
OK,Go Next
]
[Retry]
[ERR Fix SP.]
[Return to Menu]
11
\
\
9
Some auto setup instructions will be
listed, make sure to follow them.
Make sure you have: hooked up the microphone and
moved obstacles to the speakers out of the way. If you
have a subwoofer make sure it is turned on and has the
volume turned up.
WARNING:
The test tones are very loud!! Make sure
there are no infants or small children in the room and
that no one who will be scared, upset or injured by loud
noise is present. You yourself may want to wear ear-
plugs. If you lower the volume of test tones with the
master volume, the result will likely be incorrect speaker
settings.
10 If you have followed all setup
instructions and warnings above make
sure that the arrow is pointed to
START and press ENTER. Be prepared
for loud test tones.
Try to be as quiet as possible after hitting ENTER. The
test tones may take up to 30 seconds.
The volume automatically increases to 0dB, then the
system will output some test tones and establish
ambient noise levels, the microphone status, and what
speakers you hooked up.
11 Check the speaker settings on the OSD
If they match your speaker configuration make sure
OK,GO NEXT
is selected and press
ENTER
. The
system will output another series of test tones to
establish the proper channel level, speaker distance and
acoustic calibration EQ. Again, be prepared for loud test
tones. The test tones may take up to 5 minutes this
time. After it has finished, you see the SPEAKER
SYSTEMS CHECK screen. If you want to view the
settings select
NEXT
and press
ENTER
repeatedly. If
not, simply go to step 13.
If they do not match the speaker configuration you
hooked up and you want to try again select
RETRY
with
5∞
buttons and press
ENTER
. Follow the instructions
above from step 10.
If the speaker settings do not match the speaker
configuration you connected and you want to input the
settings manually select
ERR
=
FIX SP
with the
5∞
buttons, press
ENTER
and go to step 12.
If you see an ERR message in the right side column,
there may be a problem with the speaker connection. If
selecting RETRY doesn't fix the problem, turn off the
power and check the speaker connections.
Auto Surround Setup
Now Analyzing
•••
Surround Analysis
Speaker Systems
[OK]
Speaker
Distance [
OK
]
Channel
Level
[
OK
]
Acoustic Cal EQ
[
OK
]
[
Cancel
]
Speaker Systems Check
” Normal Surround ”
FRONT
[ SMALL ]
CENTER
[ SMALL ]
SURROUND
[ SMALL ]
SURR BACK
[ SMALL
X
2]
SUB WOOFER [
YES
]
[
Next
] ( Back/Next )
[Return]
\
Содержание Elite VSX-49TX
Страница 3: ...3 ...
