Pioneer DVR-560HX-K, Руководство по обслуживанию

Страница: 104 / 200

104
DVR-LX61D
1 2 3 4
A
B
C
D
E
F
1 2 3 4
K
e
y
Operation
Switc
hing (*:
Default)
Used in Specific- Channel Setting mode
Used in General Setting mode
Remarks
[INPUT SELECT], [C/-]
(Remote control unit supplied with this unit)
–
Switches inputs or channels
.
[ SIDE A ] , [ SIDE B ]
ON(*) / OFF
Sets SyncAGC.
[ DIG/ANA ]
– ––
Switches General setting mode and Specific setting mode.
[ Rev ×3 ], [ ×3 Fwd ]
[ Rev ×3 ] :
Decreasing 1 by 1 in the range 0 to 15.
(Cyclic operation) [
Rev CHAPTER SKIP
]
:
Decreasing 1 by 1 in the range 0 to 15.
(Cyclic operation) [
CHAPTER SKIP Fwd
]
:
Increasing 1 by 1 in the range 0 to 15.
(Cyclic operation) [ ×3 Fwd ] :
Increasing 1 by 1 in the range 0 to 15.
(Cyclic operation)
0 – 15 (Default : 12)
Sets H Threshold.
[ Rev CHAPTER SKIP ] [ CHAPTER SKIP Fwd ]
0 – 15 (Default : 10)
Sets V Threshold Level.
ON : The sync level is set to an appropriate value. OFF : Cancel the Sync AGC.
Table 1: key operations in specific-Area setting mode (1/2) Key operations in Specific Area Setting mode of the remote control units are shown in the table below (the keys are of the remote control unit for servicing unless otherwise stated):