Pioneer DVR-560HX-K, Руководство по обслуживанию

Страница: 64 / 200

64
DVR-LX61D
1 2 3 4
A
B
C
D
E
F
1 2 3 4
No. Item Description Remarks
TC
Time-code data of the DVdecode Stream, or
response data of the Time Code command
Stream time-code data are obtained when the tape is
played in forward direction. Otherwise, time-code data
are obtained through an AV/C command.
CGMS
CGMS of DVdecode Stream (from left to right,
CGMS data of bits 5-4: Audio ch 2, bits 3-2:
Audio ch 1, and bits 1-0: Video)
*CGMS (Copy Generation Management System): The
two-digit codes added to broadcast programs represent
the following:
00: Copy freely, 10: Once copy, 11: Never copy
VN
Vendor name set in ConfigROM of the connected
DV device
TM Transport Mode data obtained from the DV device
TS Transport State data obtained from the DV device
CT Cassette Type data obtained from the DV device
WP
Write-protection data obtained from the DV device
PS
Power-state data obtained from the DV device
OS
Output signal mode data obtained from the DV
device
[DVdecode:XXX]
Whether Yes (in the process of requesting DV
input) or No is indicated in XXX
Normally, Yes is indicated only when CH is set to DV.
Data are displayed only if one DV device is identified.
CA Connect AV data obtained from the DV device
LineSys Input Line System setting
RD
Rec Date of DVdecode Stream
APSTB
APS trigger bit of DVdecode stream
QU QUANTIZATION of DVdecode Stream
AMODE
AUDIO MODE of DVdecode Stream
ASPECT Aspect Ratio of DVdecode Stream
RT Rec Time of DVdecode Stream
MD
DV device mode
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
MN
Model name set in ConfigROM of the connected
DV device
Data are displayed only if one DV device is identified.
(Depending on the device, the model name may not be set in
ConfigROM.)
Camera or VTR is displayed only if one DV device is identified.
Data are displayed only if one DV device is identified.
DEC With/without DVdecode stream input
With input: Signal type (525-60, 625-50, 1125-60,
1250-50, or Invalid) is indicated, Without input: "No" is
indicated.
SF
Sampling Frequency of DVdecode Stream
If SF is 44 kHz, it is considered that 44.1-kHz audio is
input, and sound is muted on the unit.
iPCR
iPCR value of the unit
Data are displayed only if one DV device is identified.
If the connected DV device is ROOT (IRM), IRM is displayed
at the side position of GUID display.
GUID GUID set in ConfigROM of the connected DV device