Pioneer DVR-560HX-K, Руководство по обслуживанию

Страница: 70 / 200

70
DVR-LX61D
1 2 3 4
A
B
C
D
E
F
1 2 3 4
6.8 AGING MODE
A g in g for the DVD-RW/+RW/-RAM
A g in g for the DVD-R/+R
During Aging mode, the following operations are
repeated in the order shown
b elow.
The tray opens.
The tray closes.
Initialization
Recording for 60 minutes
Play
b ack for 45 minutes
<D V D-R W >
The initialization process in step 3 follows the setting
specified in "Disc setting--Basic--Auto initialization of
a D
V D-R W ."
<D V D+R W >
The initialization process in step 3 is the same as
that descri
b ed in "Disc
setting--Initialization--Initialization of a D V D+R W ."
<D V D-RAM>
In the initialization process in step 3, physical
formatting is performed, if required.
During Aging, the num b er of loops is indicated on
the FL display, as shown b elow.
[AGI N G 0001]
If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and
this information is also retained as an OSD.
During Aging mode, the following operations are repeated in the order
shown
b elow.
The tray opens.
The tray closes.
Recording for 1 minute
Recording pause for 6 minutes
Recording stops.
Play
b ack for 1 minute
Play b ack pause for 6 minutes
Play b ack stops.
Note: A continuous test of the a b ove operations is possi b le for
approximately 23 hours.
After the tray closes, disc detection is performed,
<D
V D-R>
In step 2, if the disc is judged to have recorded up to 99 titles, the
operation stops at that point.
<D
V D+R>
If the disc is judged to have recorded up to 49 titles, the operation
stops at that point. On the FL display, the num
b er of loops is retained.
On the OSD display, the error indication is retained.
During Aging, the num b er of loops is indicated on the FL display, as
shown b elow.
[AGI N G 0001]
If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and this information
is also retained as an OSD.
Note: Recording time depends on the recording rate set. For example,
if the recording rate is M N 32, only up to 60 titles can b e registered.
Check the setting for recording rate b efore performing aging.
Remote control unit
for servicing
(GGF13 8 1)
Commercially availa b le,
recorda b le D V D-R/+R
and D V D-R W /+R W /
-RAM discs
If symptoms regarding recording/
play
b ack of discs and/or the HDD that
your customer claimed are difficult to
reproduce, they can
b e reproduced with
a long-time test in Aging mode.
• W hen aging for the D V D-R W /+R W /-RAM and HDD is executed, all recorded data on them will b e erased.
• Commands from the remote control unit are accepted during Aging mode.
• If Aging mode is quit using the ESC key, indications on the FL display will return to normal display.
• Cancel timer settings
b efore entering Aging mode.
• Set the recording rate b eforehand. It cannot b e changed during Aging mode.
[Purposes]
[Tools to be used]
[Notes]
Press the ESC key on the remote control unit for servicing to quit Aging mode and return to N ormal
mode.
Notes:
• If during recording: Recording is stopped.
• If during play
b ack: Play b ack is paused. (aging for ±R W /-RAM only)
• If during initialization: The unit stops after initialization is finished.
• If the tray is
b eing opened/closed: The unit stops after the tray is opened/closed.
[How to q uit]
Press the D V D key to switch to D V D.
Load a recorda b le disc.
Select the input function of a recorda b le source.
After disc detection is performed, press the ESC then REP.B , and then PLAY keys on the
remote control unit for servicing to enter Aging mode.
[How to enter]
[Description of operation]
A g in g for the DVD-RW/DVD-R
Remote control unit
supplied with the unit