Short Operating Instruction for
EDIC-mini Tiny A65, S A60, S A62
Purpose
Professional recorders EDIC-mini Tiny A65, S A60, S A62 are intended for making high quality record of voice messages into built-in flash
memory. The recordings can be further uploaded onto the PC. Recordings are digitally signed to confirm their authenticity and lack of editing.
Main technical characteristics of the recorders
Model
Power supply
Dimensions
(mm)
Weight
(g)
Autonomy
(hours)*
Signal-to-
noise, dB
Sensitivity
Sampling rates
(kHz)
Frequency
band (kHz)
Recording/ quiescent
current
S A60-300
Li-Pol rechargeable
battery 130mA/h
40x35x9
wooden
10
25
64
up to 15
up to 12
0,1-10
5,5mA/30µA
S A62-300
Li-Pol rechargeable
battery 130mA/h
49x19x14
plastic
12
25
64
up to 15
up to 12
0,1-10
5,5mA/30µA
A65-2400
Li-Pol rechargeable
battery 750mA/h
54x37x11
wooden
27
170
64
up to 15
up to 22
0,1-10
4,5mA/20µA
A65-2400
Li-Pol rechargeable
battery 750mA/h
55x39x12
wooden
33
170
64
up to 15
up to 22
0,1-10
4,5mA/20µA
*recording duration is specified for record mode 8kHz without compression, the autonomy is lower with higher sampling rate.
- Permissible temperature of operation and storage 0 .. + 40C
- Operating lifetime 3 years
Main Features
1. Stereo recording format
2. Voice Activation System (VAS)
3. 2 timers to start recording at the preset time (daily or once)
4. Circular recording mode
5. Built-in markers to determine records' authenticity
6. LED indication
7. Built-in clock
8. Password protection of the access to records
Recording
To start recording, turn the recording switch to the "ON" position. The LED flashes 5 times, and recording starts. During recording the LED flashes
in two series, the number of flashes indicating:
Number of flashes
Battery charge level (1st series)
Free memory capacity (2nd series)
1
80-100%
75-100%
2
20-80%
50-75%
3
2-20%
25-50%
4
1-25%
To stop recording, turn the switch to the "OFF" position. The LED will light up for 10-12 seconds and recording will stop. For the A62 model,
when recording in stereo format, you must connect the second microphone included in the package. The voice recorder is designed to provide full-
fledged stereo recording (sound wave length = approximately 30 cm).
Important! Do not turn on or connect your voice recorder while the LED is flashing.
