Pioneer DV-757AI, Руководство по эксплуатации

Страница: 83 / 172

Additional Information 09
83
En
English
Problem
Audio mix does not sound
right or sounds incomplete
(for example, inaudible
dialog).
Disc containing the MP3 tracks
won’t play.
Can’t hear effect of
TruSurround
The audio recorded on a Super
VCD disc is not output
properly.
i.LINK troubleshooting
Problem
No i.LINK audio output.
Auto Select Play doesn’t work.
Cause / Remedy
• Make sure that Audio Output Mode is set to 2 Channel if
you've connected to the stereo inputs on your amplifier or TV
(
page 67 ).
• This player is compatible with multi-session discs, but only
plays sessions that are closed.
• If the message
UNPLAYABLE is displayed when you try to play
a disc/track, check the audio file formats ( pages 8-9 ).
• TruSurround does not work with CD, MP3, DVD-Audio, SACD or
96kHz linear PCM DVD.
• The TruSurround effect is only output through the
AUDIO OUT
(2ch) analog audio outputs.
• Make sure that Audio Output Mode is set to 2 Channel
( page 67 ).
• The effectiveness of TruSurround varies with the disc.
• If the audio is switched to [2] when playing a Super VCD that
contains only one stereo soundtrack, there may be no sound at
all. Press
AUDIO to change the soundtrack.
Cause / Remedy
• If the front panel i.LINK indicator is lit then:
–
Check that your AV receiver is DTCP (Digital Transmission
Copy Protection) compatible.
–
Check that your AV receiver is compatible with the type of
disc that you’re trying to play (for example, SACD).
• If the front panel i.LINK indicator is unlit then:
–
Check that your AV receiver is set to the correct input.
–
Check that the i.LINK cable is connected properly and that
the cable isn’t damaged. Use an i.LINK cable no longer than
3.5 meters.
–
Check that components connected using the i.LINK interface
are switched on and i.LINK Audio compatible. Do not connect DV
format players/recorders or personal computers.
–
Check that the i.LINK
Audio Out
setting is
On
(
page 70
).
• Make sure that the receiver has been selected in the
Auto
Select Play
menu (
page 71
).
• Make sure that i.LINK
Audio Out
is set to
On
(
page 70
).
• Auto Select Play doesn’t work while
LINK CHECK
shows in the
front panel display (see i.LINK-related messages opposite).