Pioneer DV-757AI, Руководство по эксплуатации

Страница: 11 / 172

Connecting Up 02
11
En
English
See the next page if you want to use a
different type of connection.
• If you need another pair of stereo
outputs (and don’t need to use the
multichannel analog outputs), you can
use the
AUDIO OUT (5.1ch) FRONT
L / R jacks ( page 14 ).
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
• Do not unplug the player from the power
outlet while it is switched on.
• Do not plug this player into a switched
power supply found on some amplifiers
and AV receivers.
The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through your TV.
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR using AV
cables, as the picture from this player
will not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the
same reason; refer to the manufacturer
for more information.)
1 Connect the VIDEO OUT and AUDIO
OUT (2ch) jacks to a set of A/V inputs on
your TV.
Use the supplied red/white stereo audio and
yellow video cable. Make sure you match up
the left and right audio outputs with their
corresponding inputs for correct stereo
sound.
Easy connections
DIGITAL AUDIO
OUT
AUDIO
OUT
(2ch)
CONTROL
OPTICAL COAXIAL
IN OUT
L
R
L
R
AUDIO OUT
(5.1ch)
CENTER
SUB
WOOFER SURROUND FRONT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
P
B
P
R
Y 2 1
2 1
(AUDIO)
S400
AC IN
AV CONNECTOR 1 (RGB)-TV AV CONNECTOR 2
TV
A/V IN
To power outlet