The Initial Settings Menu
08
69
En
English
3
Use the Joystick (up/down) to change
the distance.
• When you change the distance settings
of the front left (
L
) or front right (
R
)
speakers, all the other speaker dis-
tances change relative to it.
• Front left/right (
L
/
R
) speaker distances
can be set from 30 cm to 9 m in 10 cm.
increments.
• The center speaker (
C
) and subwoofer
(SW) can be set from –2 m to +2 m
relative to the front left/right speakers.
• Surround left/right (
LS
/
RS
) speakers can
be set from –6 m to +2 m relative to the
front left/right speakers.
4
Move the cursor left to go back to the
speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.
Channel Level
• Default setting:
Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
Fix
Variable
Initial Settings
When set to
Fix
, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable
if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB incre-
ments using the test tone output as a guide
to set the correct levels. Adjust the levels
until the output level from all channels
sounds the same from your usual listening
position. Note that Audio Output Mode
(
page 67
) must be set to
5.1 Channel
in
order to use the test tone.
Automatic:
Select
Auto
to start the test
tone output.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
ENTER
to save the settings and exit the
channel level setting screen.
Содержание DV-757AI
Страница 1: ...DVD Player Reproductor DVD DV 757Ai Operating Instructions Manual de instrucciones ...
Страница 170: ...86 Sp ...
Страница 171: ...87 Sp ...
