Message
Cause
Action (Refer-
ence page)
Check USB
The USB con-
nector or USB
cable has short-
circuited.
Check that the
USB connector or
USB cable is not
caught in some-
thing or dam-
aged.
The connected
USB storage de-
vice consumes
more than maxi-
mum allowable
current.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
Error-02-9X/-
DX
Communication
failed.
Perform one of
the following op-
erations.
–
Turn the ignition
switch OFF and
back ON.
–
Disconnect the
USB storage de-
vice.
–
Change to a dif-
ferent source.
Then, return to
the USB source.
This DivX
rental has
expired.
The inserted ex-
ternal storage
device contains
expired DivX
VOD content.
Select a file that
can be played.
Message
Cause
Action (Refer-
ence page)
Video resolu-
tion not sup-
ported
The inserted ex-
ternal storage
device contains
a high definition
DivX/MPEG-1/
MPEG-2/
MPEG-4 file.
Select a file that
can be played.
It is not pos-
sible to write
it in the
flash.
This unit
’
s flash
memory used
as the tempo-
rary storage
area is full.
Select a file that
can be played.
Your device
is not au-
thorized to
play this
DivX pro-
tected video.
This unit
’
s DivX
registration
code has not
been authorized
by the DivX
VOD contents
provider.
Register this unit
to the DivX VOD
contents provider.
Format Read
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disap-
pears and you
hear sound.
Video frame
rate not sup-
ported
DivX file
’
s frame
rate is more
than 30 fps.
Select a file that
can be played.
Audio For-
mat not sup-
ported
This type of file
is not supported
on this unit.
Select a file that
can be played.
Message
Cause
Action (Refer-
ence page)
Creating the
Database
has failed.
The mode was
switched to
video or JPEG
image display
while the data-
base was being
created.
Create the data-
base again. (Page
22)
iPod
Message
Cause
Action
Format Read
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disap-
pears and you
hear sound.
Error-02-6X/-
9X/-DX
Communication
failed.
Disconnect the
cable from the
iPod. Once the
iPod
’
s main
menu is dis-
played, reconnect
the iPod and reset
it.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod
’
s main
menu is dis-
played, reconnect
the iPod and reset
it.
Error-02-67
The iPod firm-
ware version is
old.
Update the iPod
version.
Message
Cause
Action
Stop
There are no
songs.
Transfer songs to
the iPod.
There are no
songs in the
current list.
Select a list that
contains songs.
Not Found
No related
songs.
Transfer songs to
the iPod.
Bluetooth
Message
Cause
Action
Error-10
The power failed
for the
Bluetooth mod-
ule of this unit.
Turn the ignition
switch OFF and
then to ACC or
ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Understanding auto EQ error
messages
When correct measurement of the car
’
s interior
acoustic characteristics is not possible using
auto EQ, an error message may appear on the
display. In such cases, refer to the table below to
see what the problem is and how it may be cor-
rected. After checking, try again.
Additional information
62
Appendix
Additional information
En
<YRB5266-A/N>62
