Pinnacle Systems miroVIDEO DV200, Руководство пользователя

Страница: 101 / 114

User´s Guide
VII
U
NINSTALLING
miroVIDEO DV200
DRIVERS AND SOFTWARE
To uninstall the miroVIDEO DV200 boards and the miroDVTools there is a
uninstaller located in the miroVIDEO DV200 program group.
This uninstaller deletes all DV200 drivers, the DV200 software and removes
the Registry entries for the miroVIDEO DV200 board.
You can also remove the software and registry entries via the Control Panel.
Select Start, Settings, Control Panel, Add/Remove Programs, and
Install/Uninstall. In the list, you will find two entries, miroVIDEO DV200
and miroVIDEO DVTools. You can remove the software using Add/Remove.
C
HANGING THE NUMBER OF COLORS AND SCREEN RESOLUTION
To use the DVTools, you must set your graphics board to at least a 16-bit
color resolution and a 800 x 600 resolution.
To change the number of colors and the resolution, proceed as follows:
1. From the Start menu, select Settings and the Control Panel.
2. Select Display.
3. In the Display Properties dialog, select the Settings tab.
4. From the Color Palette list box, select a High Color or a True Color
setting. Click OK.
5. Use the slider under Resolution, to change the resolution.
6. Select whether you want to restart your system or you want the settings
to be applied immediately. Click OK.
C
OMPATIBLE
DV
DEVICES
The DV200 is compatible with a wide range of DV equipment. Please refer
to the Pinnacle Systems homepage at http://www.Pinnaclesys.com for
further information about compatible devices.