Pilz PMCtendo SZ Series, Руководство по эксплуатации

Страница: 3 / 88

Contents
Operating Manual PMCtendo SZ
1002405-EN-04
3
6.2.2 EnDat 2.2 power and feedback plug connectors 25
6.2.2.1 Terminal assignment – Power plug connectors 27
6.2.2.2 Terminal assignment – EnDat 2.2 feedback plug connectors 29
6.2.2.3 Overview – Motor types and plug connectors 30
6.2.3 HIPERFACE DSL power and feedback plug connectors 32
6.2.3.1 Terminal assignment – HIPERFACE DSL plug connectors 34
6.3 Forced ventilation unit 36
Section 7 Commissioning 37
7.1 Checking the motor installation 38
7.2 Checking the motor connection 39
7.3 Putting the motor into operation 40
7.3.1 Notes for troubleshooting 40
7.4 Testing and bedding in the brakes 42
Section 8 Service 43
8.1 Maintenance 43
8.2 Procedure in case of faults 44
8.3 Motor replacement 44
Section 9 Technical data 45
9.1 General features 45
9.2 Electrical features 45
9.3 Ambient conditions 46
9.4 Forced ventilation unit 46
9.5 Feedback connection 46
9.6 Holding brake 47
9.6.1 Holding brake – Technical data 49
9.7 Temperature sensor 50
9.8 Derating 51
9.9 Type-specific data 52
9.9.1 Attachment conditions 52
9.9.2 SZ motors with convection cooling 53
9.9.3 SZ motors with forced ventilation units 55
9.9.4 Dimensional drawings 57
9.9.4.1 PMCtendo SZ.3x 58
9.9.4.2 PMCtendo SZ.3x (HIPERFACE DSL) 59
9.9.4.3 PMCtendo SZ.4x – SZ.8x with convection cooling 60
9.9.4.4 PMCtendo SZ.4x – SZ.7x with convection cooling (HIPERFACE DSL) 62
9.9.4.5 PMCtendo SZ.4x – SZ.8x with forced ventilation unit 64
9.9.5 Mass moment of inertia 66
9.9.6 Permitted shaft load 67
9.9.7 Torque/speed curves 73
9.9.8 Key safety-related figures 82