Pilot Communications Pitts Challenger, Руководство пользователя, Страница: 73 / 85

WING GUIDE WIRES
The wing guide wires are fitted with a quick release on one end, and are permanently fixed at the other.
The support that we installed earlier under the landing gear is where the guide wires will be
permanently attached, using the same crimping method described previously.
At the other end you will find Pilot-RC’s patented quick release system, which allows for the guide
wires to be attached or released in seconds.
This is due to them being permanently fixed to a cleverly shaped bracket, which simply slots into place,
and then secure by tightening the screws.
As before, crimp the guide wires in place assuring of sufficient tension on the guide wires
Secure the placement of the guide wires at their cross over point as per the picture below.