Pilot Communications Pitts Challenger, Руководство пользователя, Страница: 6 / 85

Pilot-RC reserves the right to update the model, instructions and limited warranty without notice.
If you have any problems and questions, please contact Pilot-RC:
Web: www.Pilot-Rc.com
Email: pilot-rc@139.com, info@pilot-rc.com
Phone: +86 760 88781293 FAX: +86 760 88780293
Address: No34, Chengnan Er Road, Zhongshan City, 528455, Guangdong, Province, China.
3- Assembly
Please note that pictures are for reference only. Some pictures shown are from other models which
follow the same build steps.
MAIN LANDING GEAR ASSEMBLY AND WING WIRES:
Position the fuselage upside down and screw on the carbon undercarriage to the fuselage using the nuts
and bolts provided, trapping the provided metal guide wires support between the landing gear and the
fuselage.
We will crimp the tension wires to the plate later in this manual.
Screw the wheel axles on to the landing gear, and then slide on the wheels and secure in place with the
provided grub screws.
Some users may prefer to leave the wheels until the end of the build, to prevent the model
moving on the build table.