4-11
Climb
Climb
4-11-01
1.
Ice Protection System.................
AS REQUIRED
2.
Autopilot......................................
AS REQUIRED
3.
FMS Auto speed (if selected)......
Verify and confirm correct
4.
POWER CONTROL LEVER.......
SET to MCP
(EPECS sets power to ambient
conditions)
CAUTION
Monitor for exceedances. EPECS will not protect against all possibilities of
exceedance.
5.
ACS BLEED AIR switch..............
AUTO (if selected INHIBIT for takeoff)
6.
Cabin pressure............................
Monitor
Engine instruments:
7.
Torque.........................................
MONITOR (max. 44.8)
8.
ITT...............................................
MONITOR (max. 825)
9.
Ng...............................................
MONITOR (max. 104)
When passing transition altitude:
10.
Baro............................................
SET STD and cross check
CAUTION
If autothrottle is installed and engaged and FD/AP is set to OFF, monitor for
engine torque exceedances.
If the aircraft is levelled off below 18,000 ft with autothrottle engaged and
FD/AP set to OFF, the autothrottle can command the engine torque to
exceed the max cruise limitation of the engine.
---------- END -----------
Section 4 - Normal Procedures (EASA Approved)
Climb
Pilot's Operating Handbook
Report No: 02406
Issue date: Mar 06, 2020
Page 4-11-1
12-C-A15-30-041
1-00A-131A-A
FOR
GENERAL
AND
FAMILIARIZATION
PURPOSES
ONLY