manualshive.com logo in svg

PIETRO FIORENTINI 30051, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
PIETRO FIORENTINI 30051 Скачать руководство пользователя страница 72

72 

GOVERNORS NOR

TH AMERICA

72 

GOVERNORS NOR

TH AMERICA

US

LOW PRESSURE GAS REGULATOR 

|

 INSTALLATION 

|

 REV. A

Operation, maintenance and warning manual

7.4.1 -  POST-INSTALLATION INDICATIONS

Check when installation is complete:

• 

the ignition of connected combustion appliances;

• 

the operating pressure in dynamic phase with variable flow rates and static phase with zero flow rate.

Ensure that all connections are tightened properly to avoid any leakage during commissioning.

Protect the equipment from blows and shocks, even accidental.

7.5 -  EQUIPMENT ADJUSTMENTS

All regulators are calibrated to the values required by the Customer directly at the factory 
PIETRO FIORENTINI S.p.A.
No further adjustments need to be made.

Calibration values are indicated on the identification plate (refer to Section 2.8).

Adjustment

Operator qualification

•  Installer. 

PPE required

 

 

 

 

  

The PPE listed in this chart relates to the risk associated with the equipment. 
For the PPE required to protect against risks associated with the workplace, 

installation or operating conditions, refer to:

• 

the regulations in force in the country of installation;

•  any indications provided by the Safety Manager at the installation facility.

Tab. 7.44.

The pressure of the relief valve does not require to be adjusted in the field.

Contact PIETRO FIORENTINI S.p.A. for further requirements.

It is prohibited to make unauthorized changes on the equipment without permission from 

PIETRO FIORENTINI S.p.A.

 

Содержание 30051



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды