PIETRO FIORENTINI 30051 Скачать руководство пользователя страница 29

Страница: 29 / 98

GOVERNORS NOR

TH AMERICA

LOW PRESSURE GAS REGULATOR

DESCRIPTION AND OPERATION

REV. A

Operation, maintenance and warning manual

4 - DESCRIPTION AND OPERATION

4.1 - VERSIONS, MODELS AND CONFIGURATIONS

The different versions of the equipment must be:
• contractually established;
• set up only at the establishments PIETRO FIORENTINI S.p.A.

Typical versions of GOVERNORS NORTH AMERICA are listed in Tab. 4.13:

Type

Description

Image

Version
Standard

This version has a max. inlet pressure of 0.5 bar and can be
supplied with:
• internal filtration element to protect the plugs;
• block valve for maximum and minimum downstream pres-

sure.

Version
Zero

This version can be used as a
zero device, that is, keeping the downstream pressure at zero
as the flow demand changes.

Version
Ratio

This version can be used as a gas/air ratio device by keeping
gas/air mixing constant as the flow rate changes.

It is possible to calibrate the device to achieve 1:1 gas/
air mixing.

Version
Goval

This version has, compared to the standard version, a max inlet
pressure extended to 1 bar.

Version
OPD

This version features two regulators in series, the regulator:
• upstream has a monitor function;
• downstream functions as a regulator.

Содержание 30051



































































































Результаты поиска

Содержание 30051

Отзывы:

Бренды по названию

Популярные бренды

PIETRO FIORENTINI 30051, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 30051

Отзывы:

Бренды по названию

Популярные бренды