manualshive.com logo in svg

PIETRO FIORENTINI 30051, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
PIETRO FIORENTINI 30051 Скачать руководство пользователя страница 13

13 

GOVERNORS NOR

TH AMERICA

LOW PRESSURE GAS REGULATOR 

|

 GENERAL INFORMATION 

|

 REV. A 

US

Operation, maintenance and warning manual

2.7 -  SYMBOLS USED IN THE MANUAL

Symbols (some of them conforming to ANSI Z535.4) are used within the manual to:
•  emphasize information of relevant importance;
•  draw attention to the purpose of proper and safe use of the machine.

Symbol

Definition

Symbol used to identify important warnings for operator and/or equipment safety.

Symbol used to identify particularly important information in the manual.
The information may also concern the safety of personnel involved in using the equipment.

Obligation to consult the manual.
Indicates a requirement for personnel to consult (and understand) the equipment manual before 
working with or on it.

Tab. 2.4.

DANGER - Indicates an imminently hazardous situation which, if not avoided, will result in death or serious 
injury.

WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or seri

-

ous injury.

CAUTION - Indicates a potentially hazardous situation which, if not avoided, may result in minor or moder

-

ate injury.

NOTICE - It is used to address practices not related to bodily injury.

SAFETY INSTRUCTIONS (or equivalent) - These are signs that indicate specific safety-related instructions 
or procedures.

Содержание 30051



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды