manualshive.com logo in svg

PICASO 3D Designer X, Руководство пользователя

Поделиться
Скачать
PICASO 3D Designer X Скачать руководство пользователя страница 68

QUESTIONS AND ANSWERS

67

What kind of service is required for the printer?

Guides, electronic boards of the control unit, fans in the printer casing, and the thermal 
barrier of the heating element need inspection and maintenance. All lubricant cleaning or 
oil change operations must be performed while the Designer XL is off.
 
Do not allow lubricant to change its color to red-brown; prevent stains and traces from 

adhesion agents, as well as corrosion on the guides surface. For replacement use filament 

lubricant as per DIN 51825, class KP00K.

Use a special brush and a portable vacuum cleaner (not supplied with the printer) to clean 
the control unit and the casing fans from dust and fine dirt.

 
The maintenance frequency depends on operating conditions. Check the condition of the 
printer units and perform appropriate maintenance as necessary, at least once a year.
 

Содержание Designer X





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды