PICASO 3D Designer X, Руководство пользователя

Страница: 47 / 68

CALIBRATION OF THE CLEANING SYSTEM
46
Designer XL is equipped with a nozzle cleaning system that prevents outer shell defects
during printing. A special container is used to collect filament residues from under the
cleaner (not included in the starter kit). There is no need to set up the cleaning system on a
new 3D printer and before each printing.
To calibrate, you need to print «Cleaner calibration template.plgx» file from the supplied
USB drive.
If you use a container, check its contents after at least every 2 printing procedures and
clear if necessary.
Calibrate the cleaning system in the following cases:
If the cleaning system does not work properly. Filament does not enter the hole
of the silicone cleaner and accumulates on the nozzle, which leads to defects in
printed models.
After a factory reset to update the printer firmware. During such an update,
calibration values are reset. The system needs new values to be set.