Phytec phyCORE-P8xC51Mx2, Руководство по оборудованию

Страница: 71 / 82

The phyCORE-P8xC51Mx2 on the Development Board LD 5V

PHYTEC Messtechnik GmbH 2005 L-602e_3
63
14.3.9 Pin Assignment Summary of the phyCORE, the
Expansion Bus and the Patch Field
As described in section 14.1, all signals from the
phyCORE-P8xC51Mx2 extend in a strict 1:1 assignment to the
expansion bus connector X2 on the Development Board. These
signals, in turn, are routed in a similar manner to the patch field on an
optional expansion board that mounts to the Development Board
at X2.
Please note that, depending on the design and size of the expansion
board, only a portion of the entire patch field is utilized under certain
circumstances. When this is the case, certain signals described in the
following section will not be available on the expansion board.
However, the pin assignment scheme remains consistent.
A two dimensional numbering matrix similar to the one used for the
pin layout of the phyCORE-connector is provided to identify signals
on the expansion bus connector (X2 on the Development Board) as
well as the patch field.